Oil & Gas Valves & Flow Control in Egypt
Upstream, midstream, refining and petrochemicals
The Oil & Gas sector demands absolute reliability, safety, and compliance. From wellhead to refinery, we provide critical equipment that protects personnel, assets, and the environment.
How we support Oil & Gas in Egypt
What ACTS actually does on a oil & gas plant, and which manufacturer sits behind each capability.
Safety relief valves for overpressure protection, sized for two-phase flow, thermal expansion, and fire-case scenarios
Farris EngineeringPrecision control valves for severe-service applications, including high-pressure drop, erosive media, and high-temperature conditions
Dyna-Flo Control Valve ServicesHeat exchanger maintenance and retubing to restore thermal efficiency and extend asset life during turnarounds
ESTPressure testing and pipeline isolation for commissioning, maintenance, and integrity verification
ESTAPI 526/527 compliance verification and re-certification support
Key Applications
Where Oil & Gas work actually happens
Process area by process area: the engineering challenge, how we solve it, why that approach is the right one, and the exact product line behind the claim.
Upstream
wellhead flow control, separation vessels, gas compression, and pipeline protection
- The challenge
- Wellhead and separator pressures swing hard and fast as a well is choked, tested, or shut in, and equipment sized only for steady-state conditions can be overwhelmed in seconds during an upset.
- Our solution
- Farris Series 1890 direct-spring relief valves protect separators and gathering lines at their exact set pressure with no external power required, while Dyna-Flo's sliding-stem control valves hold flow steady through choke manifolds and gas-compression trains.
- Why it works
- A direct-spring valve responds in milliseconds with nothing to fail: no signal, no actuator, no power supply. That is exactly what a remote wellhead with no control room needs.
Midstream
pipeline regulation, pump station control, and storage terminal overpressure protection
- The challenge
- A pipeline or storage terminal spans huge distances while holding pressure inside a tight band the entire way, so a single overpressure event at a pump station or tank farm risks a spill, not just downtime.
- Our solution
- Dyna-Flo rotary valves throttle and isolate flow at pump stations and block-valve sites, while Farris Series 2600/2700 flanged relief valves protect storage tanks and pipeline sections rated for air, steam, and water service.
- Why it works
- ASME/NB-certified, flanged construction drops straight into existing pipeline spec with no special adaptation, and rotary trim gives high flow capacity with tight shutoff in one compact body.
Refining
process unit isolation, fractionation column control, fired heater protection, and catalyst handling
- The challenge
- A refinery runs dozens of interconnected units around the clock; a relief or isolation failure on one column or fired heater can cascade into a unit-wide shutdown, or worse.
- Our solution
- Farris Series 3800 pilot-operated valves protect fractionation columns and fired heaters where large relief capacity and tight operating margins matter, backed by iNSURE® wireless monitoring so engineers can check valve condition without shutting the unit down to inspect it.
- Why it works
- Pilot-operated design gives a higher opening ratio than a direct-spring valve of the same size, so the column can run closer to its relief set point without nuisance lifting, meaning tighter, more efficient operation.
Petrochemical
reactor feed control, steam cracking, polymerization, and specialty chemical production
- The challenge
- Reactor feed and cracking-furnace control both demand precise, repeatable positioning under high pressure drop and often erosive or fouling media. A valve that sticks or wears prematurely here stops production.
- Our solution
- Dyna-Flo's DFC/DFO and DFR pneumatic actuators pair with severe-service trim to hold accurate position under high delta-P, while EST's Pop-A-Plug keeps the reactor's heat exchangers sealed between turnarounds.
- Why it works
- A spring-and-diaphragm actuator fails to a known, safe position the instant instrument air is lost, so the reactor defaults to safe, not to wherever the valve happened to be.
What we supply into Oil & Gas
Every line named above, and its manufacturer literature
Each line opens onto what it specifically does in Oil & Gas, its product page, and its brochures, catalogs and installation manuals.
01Farris EngineeringSERIES 1890Direct spring-operated, threaded1PDF
- Role in Oil & Gas
- The everyday relief valve across the value chain: separators, gathering lines, and utility systems where a proven, ASME Section VIII-rated direct-spring design is all the duty calls for.
- The line
- ASME Section VIII, rated to 800 psig: air, steam & liquid service.
Documents
02Farris EngineeringSERIES 2600 / 2700Direct spring-operated, flanged/threaded4PDFs
- Role in Oil & Gas
- Flanged relief protection for storage tanks and pipeline sections, dropping straight into existing ASME/NB-certified pipeline spec with no special adaptation.
- The line
- ASME/NB-certified: air, steam, water.
03Farris EngineeringSERIES 2850Threaded, spring-loadedIn catalog
- Role in Oil & Gas
- A compact threaded option for smaller-bore relief duty on wellsite and gathering-system piping, where a full flanged body isn't justified.
- The line
- Air, steam, vapor & liquid.
Covered in these catalogs
No sheet of its own in the library; this line is covered inside the brand overview.
04Farris EngineeringSERIES 3800Pilot-operated2PDFs
- Role in Oil & Gas
- The pilot-operated line for refinery columns and high-capacity gas relief, where large capacity and a tight operating margin matter more than simplicity.
- The line
- Snap-acting or modulating control, semi/full-port nozzle.
05Farris EngineeringSERIES 6400 / 6600Flanged steam safety valves1PDF
- Role in Oil & Gas
- Boiler safety valves for the package boilers refineries and gas plants run for process steam. A dedicated steam design, not a general valve pressed into steam service.
- The line
- Boiler safety service.
Documents
06Farris EngineeringSIZEMASTER™ · INSURE® · FAST NETWORKSizing, monitoring & aftermarket support2PDFs
- Role in Oil & Gas
- Sizing software and iNSURE® wireless monitoring keep every relief valve across a facility correctly sized and its condition visible between turnarounds.
- The line
- Sizing software, real-time relief-valve monitoring, and factory-backed repair/recertification network.
07Dyna-Flo Control Valve Services360 / 390 / 350 / 370 / 380 / DF2000Linear sliding-stem valvesIn catalog
- Role in Oil & Gas
- Sliding-stem control across wellhead chokes, gas-compression trains, and refinery process units. The workhorse control valve for this entire industry.
- The line
- 1" to 16", pressure classes 150 to 2500.
Covered in these catalogs
No sheet of its own in the library; this line is covered inside the brand overview.
08Dyna-Flo Control Valve ServicesSERIES 570 / 590Rotary valves (segmented & full ball)In catalog
- Role in Oil & Gas
- Rotary ball and segmented valves for pump-station throttling and pipeline block-valve duty, giving high flow capacity with tight shutoff in one compact body.
- The line
- High-flow, throttling or on/off service.
Covered in these catalogs
No sheet of its own in the library; this line is covered inside the brand overview.
09Dyna-Flo Control Valve ServicesDF100 / DF234 / DF270Integral actuator valvesIn catalog
- Role in Oil & Gas
- Compact integral valve-and-actuator units built for upstream dump-valve service, where separator and slug-catcher discharge needs a fast, self-contained response.
- The line
- Compact dump-valve applications.
Covered in these catalogs
No sheet of its own in the library; this line is covered inside the brand overview.
10Dyna-Flo Control Valve ServicesDFC / DFO / DFLP / DFN / DFR / DFRP / D-FORCEPneumatic actuators12PDFs
- Role in Oil & Gas
- Fail-safe pneumatic actuation for every control and shutdown valve across the facility, driving to a known safe position the instant instrument air is lost.
- The line
- Linear & rotary, spring-return or double-acting.
Documents
8 of 12- DFC DFO BulletinPDFProduct Bulletins
- DFLP BulletinPDFProduct Bulletins
- DFN BulletinPDFProduct Bulletins
- DFR BulletinPDFProduct Bulletins
- DFRP BulletinPDFProduct Bulletins
- DFC InstructionsPDFInstruction Manuals
- DFLP InstructionsPDFInstruction Manuals
- DFO InstructionsPDFInstruction Manuals
11Dyna-Flo Control Valve ServicesPRO-50 · 4000 · 5000 · T950XP · PS2/760Instrumentation9PDFs
- Role in Oil & Gas
- The instrumentation layer behind every control loop: pressure and level controllers, positioners, and I/P transducers keeping valves on setpoint.
- The line
- Pressure/level control, I/P transducers, positioners.
Documents
8 of 9- 760 BrochurePDFBrochures
- PS2 BrochurePDFBrochures
- 4000 BulletinPDFProduct Bulletins
- 5000 BulletinPDFProduct Bulletins
- PRO-50 BulletinPDFProduct Bulletins
- 4000 InstructionsPDFInstruction Manuals
- 5000 Displacer InstallPDFInstruction Manuals
- 5000 InstructionsPDFInstruction Manuals
12ESTPOP-A-PLUG®Mechanical tube plugging23PDFs
- Role in Oil & Gas
- Weld-free tube plugging that keeps refinery and gas-plant heat exchangers sealed between turnarounds, without a shutdown to fix a single leaking tube.
- The line
- Weld-free sealing of leaking heat exchanger, condenser & boiler tubes, rated to 7,000 psi.
Documents
8 of 23- Literature Manual Tool Pop-A-PlugPDFMarketing LiteratureMK0011
- Pop-A-Plug ACHE Tech BriefPDFMarketing LiteratureMK0014
- Pop-A-Plug CPI Perma Plug LiteraturePDFMarketing LiteratureMK0003
- Pop-A-Plug CPI Perma Tube Plug Tech BriefPDFMarketing LiteratureMK0004
- Pop-A-Plug Fertilizer Market LiteraturePDFMarketing LiteratureMK0022
- Pop-A-Plug P2-LiteraturePDFMarketing LiteratureMK0005
- Pop-A-Plug P2-Technical BriefPDFMarketing LiteratureMK0006
- Pop-A-Plug TA LUFT CertificatePDFCertifications & Reports
13ESTGRIPTIGHT®Hydrostatic test & isolation plugs32PDFs
- Role in Oil & Gas
- Hydrostatic test and isolation plugs for commissioning new pipeline sections and pressure-testing vessels without welding in temporary test spools.
- The line
- Pipe, pipeline and pressure vessel testing, rated up to 15,000 psig.
Documents
8 of 32- GripTight Elbow Test PlugPDFMarketing Literature
- GripTight Isolation Plug Tech BriefPDFMarketing LiteratureMK0037
- GripTight MAX LiteraturePDFMarketing LiteratureMK0026
- GripTight PE Test Plug LiteraturePDFMarketing LiteratureMK0029
- GripTight Reverse Pressure LiteraturePDFMarketing LiteratureMK0074
- GripTight Reverse Pressure Tech BriefPDFMarketing LiteratureMK0036
- GripTight Test Plug Tech BriefPDFMarketing LiteratureMK0034
- OD GripTight LiteraturePDFMarketing LiteratureMK0031
14ESTG-SERIESTube testing tools3PDFs
- Role in Oil & Gas
- Vacuum tube and joint testers that locate a leaking heat-exchanger tube before it's found the hard way, during scheduled inspection rather than an unplanned trip.
- The line
- Testing guns for locating and identifying leaking tubes.
15ESTHYDRA-LOC®Tube stabilizers & sleeving2PDFs
- Role in Oil & Gas
- Hydraulic tube sleeving that recovers a corroded or eroded exchanger tube's actual service life instead of forcing a full retube.
- The line
- Repair for fractured, severed, or damaged tube sections.
Brands behind our Oil & Gas work
ACTS is Egypt's sole agent for Farris Engineering (Curtiss-Wright) safety relief valves: API 526 process PRVs, steam safety valves and iNSURE® monitoring.
ACTS is Egypt's sole agent for Dyna-Flo (Curtiss-Wright) control valves: sliding-stem, rotary ball and DF400 eccentric plug, plus actuators and positioners.
ACTS is Egypt's sole agent for EST Group (Curtiss-Wright): Pop-A-Plug® tube plugging, Hydra-Loc® sleeving and GripTight® hydrostatic test and isolation plugs.
Other industries we serve in Egypt
Sourcing for a Oil & Gas project?
Sized, quoted, and answered by an engineer
Send us the service conditions and one of our application engineers will follow up, typically within 24 hours.