Pop-A-Plug® CPI/Perma Tube Plugs
Weld-free mechanical tube plug with a helium-tight metal-to-metal seal.
A hydraulically installed mechanical tube plug that seals leaking heat exchanger and condenser tubes with a helium-leak-tight metal-to-metal seal, with no welding or explosives.
- Metal-to-metal helium-tight seal
- No welding or explosives
- ASME PCC-2 recommended method
- Installs in seconds with a Pop-A-Plug ram
| Rated Pressure | 1,000 PsiG (68.9 BarG) |
|---|---|
| Tube ID Range | 0.472" to 2.067" |
| Seal | Metal-to-metal, helium leak-tight |
| Standard | ASME PCC-2 method |
Specifications transcribed from the manufacturer datasheet. Confirm final selection with the product catalog or on request.
From Curtiss-Wright’s official YouTube channel.
EST Group: Pop-A-Plug® Tube Plugging System
Through-The-Tube Plugging™
Product Overview: Pop-A-Plug® Tube Plugging System
Pop-A-Plug® Heat Exchanger Tube Plugging: Introduction
Pop-A-Plug® Heat Exchanger Tube Plug
Pop-A-Plug® Installation, 6,000 PsiG Test and Removal
Pop-A-Plug CPI Perma Plug Literature
Product literature, technical brief or application sheet.
Pop-A-Plug CPI Perma Tube Plug Tech Brief
Product literature, technical brief or application sheet.
Installation Procedure Pop-A-Plug CPI Perma Near End
Operating, installation or technical specification document.
Procedimiento Para La Instalacion De Pop-A-Plug® CPI Perma™ En La Placa Tubular Cercana (instalacion estandar)
Operating, installation or technical specification document.
Titanium Size Ranges CPI Perma
Operating, installation or technical specification document.
Through The Tube Installation Procedures CPI Perma
Operating, installation or technical specification document.
Need a Pop-A-Plug® for your project?
Send us your requirement and one of our application engineers will follow up, typically within 24 hours.