GripTight® Isolation & Double Block and Bleed Plugs
Isolate and monitor explosive vapors during hot work, then hydrotest the weld.
Isolate and monitor potentially explosive vapors during hot work, and hydrotest weld connections, with one easy-to-operate tool. The dual port design creates a positive pressure barrier between the seals, safely isolating hot work from any residual upstream gases; so little water is needed that testing is typically done with a simple hand pump. GripTight Isolation Plugs integrate a Double Block and Bleed test plug with GripTight grippers, minimizing the risk of blowout or expulsion from unexpected upstream pressure.
ACTS is Pop-A-Plug® & GripTight®’s sole agent in Egypt, supplying the GripTight® Isolation & Double Block and Bleed Plugs to oil & gas, petrochemical and power generation plants nationwide from our office in Sheikh Zayed City, Giza. Sizing and selection are handled by our own application engineers, with aftermarket support and technical services once the unit is in service.
- Isolate and monitor potentially explosive vapors during hot work
- Lightweight aluminum and steel construction
- Test with minimal media: less waste water and treatment expense
- Multi-schedule capability
- ASME PCC-2 Article 503 Type IV testing device
| Isolation Plug Test | Up to 2,250 PsiG (155 BarG) between the seals |
|---|---|
| Isolation Plug Upstream | Isolates up to 1,500 PsiG (103 BarG) |
| DBB Plug Test | Up to 2,250 PsiG (155 BarG) between the seals |
| DBB Plug Upstream | Isolates up to 10 PsiG (0.7 BarG) |
| Size Range | 3/4" to 48" NPS (DN20 to DN1200); custom sizes on request |
Specifications transcribed from the manufacturer datasheet. Confirm final selection with the product catalog or on request.
From Curtiss-Wright’s official YouTube channel.
Double Block and Bleed Isolation Plug
Documentation on request
Product-specific literature for the GripTight® Isolation & Double Block and Bleed Plugs is available on request, or browse the Engineering Resource Center.
Browse Resource CenterNeed a GripTight® for your project?
Sized, quoted, and answered by an engineer
Send us your requirement and one of our application engineers will follow up, typically within one business day.