High Lift Flange Weld Test Plug
Purge dam, weld fixture, weld isolation plug and test plug in one tool.
Monitor upstream conditions, isolate and purge the weld area, perform the weld and hydrotest the weld joint with one easy tool. No blind flanging upstream, no vacuum truck to evacuate the line and no X-raying. Each test needs a minimum of water rather than filling the entire line, so you use less water and minimize environmental impact. Operating pressures to ANSI B16.5 requirements.
ACTS is Pop-A-Plug® & GripTight®’s sole agent in Egypt, supplying the High Lift Flange Weld Test Plug to oil & gas, petrochemical and power generation plants nationwide from our office in Sheikh Zayed City, Giza. Sizing and selection are handled by our own application engineers, with aftermarket support and technical services once the unit is in service.
- Four functions: purge dam, weld fixture, weld isolation plug and test plug
- Flange-to-pipe welds tested without pressurizing the entire system
- Ported center shaft allows upstream monitoring
- ASME PCC-2 Article 503 Type III testing device
| Test Pressure | Up to 2,250 PsiG (155.1 BarG) |
|---|---|
| Size Range | 3/8" to 48" NPS (DN10 to DN1200); custom sizes on request |
| Flange Classes | 150# to 600# |
| Standard Seal | Urethane; alternate materials available |
Specifications transcribed from the manufacturer datasheet. Confirm final selection with the product catalog or on request.
From Curtiss-Wright’s official YouTube channel.
High Lift Flange Weld Test Plug
Documentation on request
Product-specific literature for the High Lift Flange Weld Test Plug is available on request, or browse the Engineering Resource Center.
Browse Resource CenterNeed a High for your project?
Sized, quoted, and answered by an engineer
Send us your requirement and one of our application engineers will follow up, typically within one business day.